此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Aluminum chloride
Drinking water level PAC

Technical Specifications

Index Name Index
Liquid Solid
Alumina (Al 2 O 3) content% ≥ 12.0 32.0
Basicity% 40-95
Density (20ºC) / (g / cm 3) ≥ 1.12 -
The mass fraction of insolubles% ≤ 0.1 0.3
PH value (10g / L in water)% 3.5-5.0
Lead (Pb) mass fraction% ≤ 0.001
Hexavalent chromium (Cr 6 +) mass fraction% ≤ 0.0005
Arsenic (As) content% ≤ 0.0002
Cadmium (Cd) mass fraction% ≤ 0.0002
Mercury (Hg) mass fraction% ≤ 0.00001
Note: The table liquid product listed insolubles, lead, hexavalent chromium, arsenic, cadmium index calculated according to Al 2 O 3, when the Al 2 O 3 content of 10%, should be converted into the actual content of Al 2 O 310% Product ratio to calculate the corresponding quality scores.

Product quality indicators in accordance with: GB / 15892-2009 drinking water standards, the product has a powder fine, uniform particles, soluble in water, good flocculation, clean efficient and stable, less dosage, low cost.


Product characteristics and uses

Uses: Widely used in drinking water, urban water supply and industrial water purification and so on.

Use way: Customers can test the deployment of agent concentration depending on the water quality through, to determine the best usage. Liquid can be added directly cast, easy to use; the need to dissolve the solid product dubbed solution delivery.

1, put the amount of liquid product is 3-40kg / tons of water.

2, dubbed the 33% solid state solution, put the amount of 1-15kg / thousand tons of water.
 

Packing & Storage

Solids 25kg bag, inner plastic film, the outer layer of plastic bags, the product should be stored indoors in a dry, ventilated, cool place, keep away from moisture.

Contact us
Anji JinJiang Sponge Factory Copyright(C)2015 Support by ChinaTexNet Toocle